TANK CURE Epoxy 2 Part Fuel Tank Sealant
450g Pack for upto 20 Litre Tanks
600g Pack for Upto 60 Litre Tank
Suitable for Cars, Motorcycles and Tractors
What can you achieve with our Tank Sealant?
- cure rusted tanks
- stop leakage through seams and pinholes
- preventive treatment against leaking seams, pinholes and the build up of rust
- shield off pollution in oil tanks (after sandblasting)
Application of the tank sealant
In order to guarantee a good result you always have to do some preparation on your tank Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. It is strongly recommended to use our TANK CURE Cleaner and TANK CURE Rust Remover according to our user guidelines to guarantee a good result. These products are extensively tested in combination with our Tank Sealant.
"TANK CURE" tank sealant is based on a 2 component epoxy resin. After adding the two components together stir them thoroughly for a couple of minutes, empty the can in your petrol tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible.
You will find several products on the market to treat petrol tanks. Whatever product you are going to use: It is very important to apply sufficient sealant to cover the inside of your tank completely. Being unable to look inside the tank during the sealing process you have to stay on the safe side. Experience shows that you will need approx 450 grams for a 15 to 20 litre petrol tank. "TANK CURE" supplies two standard packages of sealant. A 450 gram package for motorcycle tanks up to 20 litres and a 600 gram package for car tanks up to 60 litres.