FLOWLINER Petrol Fuel Tank Sealer - Armour Coat Liner Restoration Kit

Prepare the fuel tank by removing any fuel taps, sensors, filters etc. all exits & threads must be protected & sealed to prevent any leakage, seal with either a blanking plate, cork or wooden dowel, internal threads can be sealed with a old petrol tap or a plug of the same thread or use a smaller diameter bolt with masking tape wrapped around the thread, then grease the blanking bolt & screw into the inside of the petrol tank to a depth of about 3mm.

Store the FLOWLINER ARMOUR COAT at room temperature for 24 hours before using.

Pour the FLOWLINER into your prepared tank, protect & seal the filler neck and invert, now move your tank slowly backwards and forwards, side to side until you are sure that all the top of your tank is coated, now stand your tank on one end and wait until the rest of the FLOWLINER ARMOUR COAThas collected, now coat the rest of the tank as previously, checking inside to see if you have coated the tank completely, now stand your tank on its other end and allow the product to collect, repeat the process again, remember the more times you repeat the process the thicker the FLOWLINER ARMOUR COAT coating will be, you need a minimum coating of 1mm thick, do not allow the coating to pool in one area when drying as this may overheat.