Cart 0
FLOWLINER BIO RUST Tank Rust Remover & WAGNER Tank Sealer Resin

FLOWLINER BIO RUST Tank Rust Remover & WAGNER Tank Sealer Resin

Tax included. Shipping calculated at checkout.
Kit contains 1 x 175ml or 250ml resin and instruction booklet.
1 x Bio Rust 1KG
Product information "Single-Component Resin for Tank Sealing"

Transparent inner coating that prevents rust formation on the inside tank surfaces and provides long-term protection against corrosion in any tank.

A tank inside of a tank

WAGNER Single-Component Tank Sealing Resin saves any tank, by installing a protective inner tank, so to speak. Even fuel tanks that are already damp or weeping liquid are usually 100% leak proof after sealing!

Durable Petrol- and Acid-Resistant Coating

WAGNER Single-Component Tank Sealing Resin is resistant to leaded and unleaded fuel, ethanol/petrol blended fuels such as E5, E10 and E85, pure ethanol, pure petrol (gasoline), two-stroke mixtures, diesel fuel, aviation fuel, motor oil, transmission oil, hydraulic oil, mineral oil, synthetic oil, two-stroke oil, brightstock, coolant, and additives, such as WAGNER Bactofin Fuel Stabilizer.

Easy application due to single component formula

As opposed to most two-component sealing compounds, WAGNER Single-Component Tank Sealing Resin does not become brittle and permanently retains a minimum amount of flexibility. This is very important as it means the inner coating bonds reliably even in case of later damage to the tank due to vibrations or minor accidents. In addition, the single-component material hardens slower, therefore giving the user more time to ensure correct sealing and to get the flowing material to all critical surfaces. 

Scope of Application

 

WAGNER Single-Component Tank Sealing Resin seals tank interiors made of steel (also alloys), aluminium, stainless steel, copper, brass and plastics such as carbon, GFRP, Kevlar, polyester or vinylester.
Even new tanks with smooth inner surfaces can be sealed with WAGNER Single-Component Tank Sealing Resin; roughening is not necessary.

Note: WAGNER Tank Sealing Resin cannot be used on tanks made of polyethylene or polypropylene, since these materials cannot be coated permanently.

 

Application & Dosing

other sizes available from our ebay shop.

 

175 ml are sufficient to seal a tank of a volume of up to 10 litres.
250 ml are sufficient to seal a tank of a volume of up to 30 litres.500 ml are sufficient to seal a tank of a volume of up to 80 litres (without baffle plates) or 60 litres (with baffle plates).

After the necessary preparatory works Pour the needed quantity of WAGNER Single-Component Resin into the tank and shake vigorously; then carefully slosh it around. The resin should completely saturate all inner walls.

When the inner coating is dry to the touch and no longer sticky (after 12 - 24 hours), a second layer can be applied.

The hardening time of the inner sealing in the tank is about 7 to 8 days.

make sure that the sealer is completely cured
 before filling tank with petrol.

Before you start your work, it is very important to read carefully the instructions on tank sealing.

  • Instructions and information:-
  • FLOWLINER BIO-RUST is a safe none toxic bio-degradable product that will remove light to very heavy rust from ferrous metals and steel without damaging the item, unlike blasting, acid dips or grinding.
  •  FLOWLINER BIO-RUST is Ideal for the removal of rust from motorcycle parts, car parts and petrol tanks prior to using a   PETROLTANK COATING  or   FLOWLINER Classic black coach paints. The FLOWLINER BIO-RUST 1000 gram kit will make up to a 20 litres of dipping or pouring solution.
  • Preparation
  •  Any Items that are oily or have any grease deposits must be thoroughly cleaned with a degreaser as any contamination will retard the FLOWLINER BIO-RUST solution, once degreased, rinse thoroughly in clean hot water to remove any degreaser and oil contamination.
  • Application 
  • Decide on the quantity of dipping solution required, you can mix at a ratio of up to 20:1 (20 parts of water to 1 part of FLOWLINER BIO-RUST crystals)
  • for heavily corroded items you can use a  stronger the mix 10:1(10 parts of water to 1 part of FLOWLINER BIO-RUST crystals)
  • First find a suitable container, plastic buckets or storage boxes make ideal containers, now fill the vessel with the correct amount of water and add the required amount of FLOWLINER BIO-RUST crystals,
  •  mix thoroughly until the crystals have dissolved. To help speed up the rust removal process hot water may be used.
  • Place the rusty items in the FLOWLINER BIO-RUST solution, depending on the severity of the corrosion,  leave to soak from 12 to 24 hours, check periodically to see how the action is working.
  • Remove the item and wash in clean water, a little agitation with a scrubbing brush will remove any surplus deposits. When dry you will need to protect your item with light oil or a painting process. For a short term protection you can re dip into the FLOWLINER BIO-RUST solution and let it dry this will protect for up to 4 weeks depending on the storage conditions and humidity, wash thoroughly before you are ready to paint your item.
  • The FLOWLINER BIO-RUST solution will carry on working until the solution blackens due to the rust deposits which weaken the solution
  •  
  • Still not sure ring 01226 743287 for more imformation.